MIRON XPE Air Duct Insulation
Price 12,600.00 บาท – 30,600.00 บาทPrice range: 12,600.00 บาท through 30,600.00 บาท
Product Details
Thermal insulation MIRON is made from Polyethylene Foam that has been chemically cross-linked for a tighter structure (Chemical cross-linked) making the XPE foam insulation have smaller and finer bubbles compared to traditional PE foam
MIRON has 3 times more air bubbles within the insulation material than regular PE insulation 3 times which is a key factor that gives MIRON insulation a low thermal conductivity of only 0.025 W/m.K high flexibility and with its 100% closed-cell structure, it prevents moisture and water penetration
XPE thermal insulation is therefore used for insulating centralized air conditioning systems (Chiller System) both in air duct systems and chillers
Applications
- Install under metal sheet roofing to prevent heat
- Install on ceilings and walls for heat insulation
- Wrap air conditioning ducts to prevent condensation
- Insulate pipe systems and machinery to prevent heat
MIRON
Thermal insulation MIRON is made from Polyethylene Foam that has been chemically cross-linked for a tighter structure (Chemical cross-linked) making the XPE foam insulation have smaller and finer bubbles compared to traditional PE foam
XPE has 3 times more air bubbles within the insulation material than regular PE insulation 3 times which is a key factor that gives XPE insulation a low thermal conductivity of only 0.025 W/m.K high flexibility and with its 100% closed-cell structure, it prevents moisture and water penetration
MIRON thermal insulation is therefore used for insulating centralized air conditioning systems (Chiller System) both in air duct systems and chillers
Operating Temperature
XPE insulation has a wide operating temperature range, usable at temperatures as low as -90 degrees Celsius and up to 105 degrees Celsius, with a relatively low density of only 25 – 35 kg/m3 making the insulation lightweight This also reduces the cost of structures used to support the insulation
Thermal conductivity
Thermal insulation is extruded into long sheets and chemically cross-linked resulting in insulation with bubbles that are smaller and finer than regular PE insulation by 3 times This results in a low thermal conductivity of only 0.025 W/m.K making it a highly efficient thermal insulation
| M-PE | Insulation Thickness | Thermal Resistance M2.K/W |
|---|---|---|
| XPE 5 mm | 5 mm | 2.12 |
| XPE 10 mm | 10 mm | 2.32 |
Water Absorption
MIRON thermal insulation has a closed-cell structure preventing water and moisture penetration (water absorption rate 1.5 g/m2) thus helping to prevent water in roofing systems and condensation in air conditioning systems
Ozone Resistance
Insulation MIRON has passed ozone resistance testing (Ozone Resistance)by the Department of Science We used an ozone test 50 pphm at a temperature of 40 degrees Celsius for a total of 72 hours. continuously The results showed no cracking or reactions from the ozone test We can therefore conclude that MIRON insulation has ozone resistance capability
Chemical Resistance
The chemical resistance of MIRON insulation has been certified by the Department of Science, which we sent for testing with Acetic Acid (Acetic Acid) Sulfuric Acid (Sulfuric Acid) Hydrochloric Acid (Hydrochloric Acid) Ammonia (Ammonia) and Nitric Acid(Nitric Acid) From these tests insulationMIRON showed no changes Therefore, we can conclude thatMIRON insulation does not react with these chemicals
Product Size Table
| Product Model | Thickness (mm) |
Width x Length (m x m) |
Area (square meters) |
|---|---|---|---|
| XPE 5 mm | 5 | 1.2 X 100 | 120 |
| XPE 10 mm | 10 | 1.2 X 50 | 60 |
| XPE 15 mm | 15 | 1.2 X 50 | 60 |
| XPE 20 mm | 20 | 1.2 X 25 | 30 |
| XPE 25 mm | 25 | 1.2 X 25 | 30 |
Technical Data Table
|
Description |
Test Results |
Standard |
|---|---|---|
|
Cell Structure |
Close Cell |
|
|
Expansion |
30X – 40X |
|
|
Apparent Density |
25 – 30 kg/m3 |
ISO 845 |
|
Thermal Conductivity |
0.025 W/m.K |
ASTM D-1003 |
|
Water Absorption |
0.00015 g/cm2 |
JIS K 6767 |
|
Tensile Strength |
30.6 N/cm2 |
JIS K 6767 |
|
Elongation at Break |
113% |
JIS K 6767 |
|
Tear Strength |
20.4 N/cm |
JIS K 6767 |
|
Permanent Set in Compression |
3.7% |
JIS K 6767 |
|
Dimensional Change on Heating (70°C / 22 h.) |
W = 0, L = -1% |
JIS K 6767 |
|
Ozone Resistance (50 pphm) |
No Crack |
ASTM D 1308 |
|
Flammability |
Class 0 |
BS 476 part 6 |
|
Service Temperature |
-90°C – 105°C |
Additional Products / Related Products
Price 900.00 บาท – 1,700.00 บาทPrice range: 900.00 บาท through 1,700.00 บาท
Price 1,150.00 บาท – 32,000.00 บาทPrice range: 1,150.00 บาท through 32,000.00 บาท
