MicroFiber glass wool insulation for air duct lining GLC with black Glass Cloth surface

Micro Duct Liner

MicroFiber Micro Duct Liner glass wool insulation is designed for installation inside air ducts to reduce air noise within ducts. Can operate at temperatures not exceeding 120°C at air velocities of 5,000 fpm (25.4 m/s) without erosion from airflow, tested according to UL 181 Erosion Test standard

Maintaining cooling inside air ducts

Air temperature inside ducts will be low at 13 – 15°C while temperature outside ducts will be higher, possibly 25 – 30°C, causing heat exchange at the duct surface. Therefore, we need thermal insulation covering inside and outside the ducts to reduce this heat exchange, keeping air inside ducts cool until it reaches the air outlets

Preventing condensation

Water droplet formation in air conditioning systems occurs frequently because air inside ducts has low temperature while air outside ducts has higher temperature. When high-temperature air outside ducts contacts the lower-temperature duct surface, water droplets form on the duct surface

Similar to a glass with ice inside – when left standing, water droplets will form on the glass sides. In cases where ducts are insulated but water droplets still form, this may indicate insufficient insulation thickness due to very cold air inside ducts or very hot ambient air temperature

Sound properties

The main purpose of Micro Duct Liner insulation is to absorb sound generated inside air ducts, which may occur from high air velocity inside ducts causing loud noise outside ducts. We can solve this problem by using Micro Duct Liner glass wool insulation to absorb sound inside ducts through the porous properties of glass wool insulation. When sound travels and contacts the insulation surface, it is absorbed until it disappears

Sound Absorption Coefficients (SAC) indicate when sound contacts material, what percentage the material will absorb and what percentage will reflect. For example, PFL 3225 at 2000 Hz frequency has SAC = 0.93, meaning it absorbs 93% of sound and reflects 7%

 

Noise Reduction Coefficient (NRC) is the average of SAC values at frequencies 250Hz, 500Hz, 1000Hz, 2000Hz that can be used as an overall sound absorption value. If this material type has NRC = 0.9, it means this material has average sound absorption of approximately 90%

Sound Absorption Coefficients (Type “A” Mounting)

Product Type	Thickness (mm.)	Sound Absorption Coefficients, ASTM C423 (Type A Mounting) Octave Band Center Frequencies (Hz)
		125	250	500	1000	2000	4000	NRC
PFL 3225	25	0.00	0.25	0.74	0.92	0.93	1.00	0.70
PFL 3250	50	0.12	0.44	1.02	1.07	0.84	0.78	0.85
PFL 4825	25	0.02	0.27	0.73	1.04	1.05	0.88	0.80
GTS 4850	50	0.20	0.86	1.12	1.07	1.01	0.99	1.00
GLC 4825	25	0.06	0.33	0.66	1.08	0.94	0.85	0.75
GLC 4850	50	0.24	0.90	1.11	1.11	1.03	1.01	1.05

Micro Duct Liner glass wool insulation surface materials

• Perforated Foil (PFL) surface covered with perforated foil
• Glass Tissue (GTS) surface covered with Glass Tissue
• Glass Cloth (GLC) surface covered with glass fiber cloth

Product Size Table

Micro Duct Liner size table

Density (Kg/m3)	Thickness (mm)	Size (W x L)
32	25	1.22 x 2.44
	50	1.22 x 2.44
40	25	1.22 x 2.44
	50	1.22 x 2.44

Technical Data Table

Features	MicroCover	Test Standard
Operating Temperature	121 °C	ASTM C 411
Density	32 kg/m3 , 40 kg/m3
Water Vapor Absorption	< 1.0 % at 49 C , 95% RH	ASTM C1104
Mold and Fungus Growth	Does not promote mold and fungus growth	ASTM C665